Skip to content

WiFi Stepper Motor Application

                            Support Vacuum Variable Capacitors

 

WiFi_Stepper_Motor_Controller-1

WiFi Stepper Motor Controller Application

Web based application to control the stepper motor with a set of useful features.

Support variable capacitors with and without range limits, like the Vacuum capacitor.

Please visit the Application Manual for Full details.

 

Version 0.4-beta is now available to the public.
Please visit the GitHub page for more details.

  • Push buttons

    To control momentary movements for both sides

  • Scan button

    Toggle button that runs the capacitor by itself to scan a range of frequencies

  • Speed Slider

    Control the speed of the movement to support from fast to fine tuning 

  • System Information

    Provide visibility on the micro controller status

  • Hostname

    Provide the option to change the controller hostname when using multiple controllers on the network

  • Switch Buttons Direction

    The option to change the button directions if the motor is installed in a different direction

  • Range Limits*

    To control capacitors with range limits like the Vacuum capacitor (*Virtual limits)

  • Position Bar

    Provides visibility of the motor/capacitor position

  • Watchdog

    To make sure that the motor/capacitor does not run nonstop

  • Persistent Data

    Settings and Parameters are saved even after power is disconnected

  • Memories

    Provides the option to set up to 10 motor positions and recall them when needed

  • Easy Firmware Update

    Updating a new version by uploading a Firmware file directly from the application without the need for the Arduino IDE

WiFi_Stepper_Motor_Controller-2-1
WiFi_Stepper_Motor_Controller-3-1

Stay tuned for more features